Каталог
Код товара: EK1227517
Датчики QTR-3A Reflectance Sensor Array
Бренд: Pololu Robotics and Electronics
 |
|
|
This compact module packs three IR LED/phototransistor pairs onto a 1.25? ? 0.3? board. The sensors are mounted on a 0.375? pitch, making this array a great minimal sensing solution for a line-following robot. Each sensor provides a separate analog voltage output.
The QTR-3A reflectance sensor array is intended as a line sensor, but it can be used as a general-purpose proximity or reflectance sensor. The module is a convenient carrier for three IR emitter and receiver (phototransistor) pairs. With sensors spaced at intervals of 0.375? (9.525 mm) along of the board_s longer axis, this array works well as a minimal detector for line-following robots, as line-following courses are commonly made using 3/4? (19 mm) black electrical tape. The middle sensor is slightly offset along the short axis of the board.
Each phototransistor is connected to a pull-up resistor to form a voltage divider that produces an analog voltage output between 0 V and VCC (which is typically 5 V) as a function of the reflected IR. Lower output voltage is an indication of greater reflection.
The LED current-limiting resistors are set to deliver approximately 17 mA to the LEDs when VCC is 5 V, making the total board consumption just over 50 mA.
- Dimensions: (32?8?3 mm) (without header pins installed)
- Operating voltage: 5.0 V
- Supply current: 50 mA
- Output format: 3 analog voltages
- Output voltage range: 0 V to supplied voltage
- Optimal sensing distance: (3 mm)
- Maximum recommended sensing distance: (6 mm)
- Weight without header pins: (0.6 g)
Датчики QTR-3A Reflectance Sensor Array. Описание в формате PDF------------------
УЛ1227517:419
