Зарядник для литиевой батареи, 1.2 А USB/DC Lithium Polymer battery charger 5-12V - 3.7/4.2v

Charge your single-cell lithium ion/polymer battery any which way you like with this board. Have a USB connection? No problem, just plug into the miniUSB connector. Only have a wall adapter? Any standard 2.1mm DC adapter which puts out 5 to 12VDC will work fine. If both are plugged in, the charger will automatically choose whichever has the highest voltage.
Other nice things about this charger include multiple LEDs for power & charging status, including a charging LED which will blink when the battery is full. If the charger gets too hot from high-speed charging, it will slow down the charge rate automatically. You can easily adjust the charge rate up to 1.2A or down to 100mA.

We also toss in an free JST cable!
Use USB or DC power - 5 to 12V input
Charges one single-cell 3.7/4.2v batteries (not for older 3.6/4.1v cells) with constant current/constant voltage
Three indicator LEDs - green for Power, orange for charging and red for error
Charging LED will blink when the battery is full
You don"t have to worry about heat dissipation in the charger, even when plugging in a 12V DC power jack - thermal protection inside will slow down the charge rate to prevent damage
2 JST connections so you can keep the battery plugged in and powering your project
Terminal block connections galore (if you don"t like JST connectors) just solder in 3.5mm terminal blocks
Default charge rate is about 500mA, but you can easily change this by soldering in a through-hole resistor on. The chip can do 100-1200 mA charging
Safety timer will stop charging after about 14 hours
The chip supports a standard 10K thermistor, which we have stuffed as a standard resistor. You can solder in a thermistor easily
Lots of information in the datasheet for the MCP73861
Fully assembled, tested and comes with a free JST cable
Schematic available for your perusal
Dimensions: 1.75" x 1.6"
Battery, USB cable and DC power plug not included. But we do stock them in the store!

Dimensions: 40mm x 44mm x 13mm (1.6in x 1.7in x 0.5in)
Weight: 11.7g ( 0.4oz)

Управление питанием USB/DC Lithium Polymer battery charger 5-12V - 3.7/4.2v. Описание в формате PDF

Управление питанием USB/DC Lithium Polymer battery charger 5-12V - 3.7/4.2v. Описание в формате PDF

------------------
УЛ1229190:2501