Преобразователь напряжения повышающий S10V Pololu 9V Step-Up/Step-Down Voltage Regulator S10V3F9

This switching regulator uses the SEPIC topology to produce 9 V from input voltages between 2.5 V and 18 V. The wide input range coupled with its ability to convert both higher and lower input voltages makes it useful for applications where the power supply voltage can vary greatly, as with batteries that start above but discharge below 9 V. The compact module can supply over 300 mA in typical applications.
Features
Input voltage: 2.5 V to 18 V (can be higher than, the same as, or lower than the 9 V output)
Fixed 9 V output with 4% accuracy
Typical continuous output current: 300 mA (actual continuous output current depends on input voltage; see Typical Efficiency and Output Current section below for details)
<2 mA typical no-load quiescent current
Integrated over-temperature shutoff
Small size: (10 mm ? 15 mm ? 3 mm)

------------------
УЛ1227522:471

Купившие этот товар также заказали:

Система дистанционного управления 4 канала RX-7- M4 на удержание

Модуль RC011. Модуль двустороннего преобразования USB в TTL или RS485

EK-SPP0025-25V-3A - Контроллер защиты от переполюсовки, 25 В, 3 А